It reflects the equipment you pair it with transparently. The Topping G5 sounds balanced throughout the spectrum with no saturation. Going wireless gets us around 9-10h of music. The 4000mAh battery inside provides 9h of wired playback and 20h of AUX HPA use. It can drive almost anything on the market. I have used 660S, 58X, and Hifiman Edition XS with it and this guy right here has plenty of juice under its anodized hood. It is certainly enough for anything you’ll use on the go, and it can push some of the full-size cans to their limits. Power-wise, the G5 is capable of delivering 1200mW of power into a 32-ohm load and that is a lot. I strongly advise you not to connect your headphones to the Line Out socket when the unit is in USB or BT mode. It has an output level of 2.1V and you CANNOT CONTROL VOLUME in this mode.

This output is used as Line In when AUX mode is active, but functions as LINE OUT in other modes.

Let’s also talk about the product’s line in/out output. It will also be blue in PCM mode and red in DSD mode. If it is solid blue, it means the input is connected. As for the status indicator, if it is flashing blue, it means the input is not connected. If it is yellow, it is charging and if it is red, it means that the charge level is critical. If the power LED is green, it means the unit has enough battery power. I mentioned that there are 2 status LEDs on the unit, one is a power indicator and the other is a status indicator. If for some reason it doesn’t switch to pairing in BT mode, you can also give this sequence a try: Gain L→ M→L→L→M→M→L→M You can also use the HPA mode by connecting your source device with a 3.5 mm output directly to the G5 using a 3.5 mm AUX cable.

You should be able to connect in 5-6 seconds. When the G5 is in BT mode, it will automatically enter pairing mode. In some rare cases, LDAC may not appear on this type of BT DAC, in which case you can manually set LDAC 24-96 from the Android Developer Options menu. If your phone supports LDAC, it will be selected automatically. To use the unit as a BT DAC, simply set it to BT mode and connect your phone to the G5. On Windows, drivers need to be installed for DSD512 or 32-768 support, or ASIO direct. It doesn’t need a driver on a Mac either. The G5 is Plug&Play compatible with Android and iOS devices. You can also play bit-perfect files from the device’s memory. You can connect your Qobuz and Tidal accounts to this app. My recommendation for Android is the UAPP app, which has bit-perfect support. First, you need to select your preferred mode using the switch on the back and connect your preferred media source.

Cirrus audio drivers windows 10